000			02779nam a22003257a 4500
003			OSt
005			20250403142751.0
008			250403b |||||||| |||| 00| 0 eng d
040			_aTUPM _bEnglish _cTUPM _dTUPM _erda
050			_aBTH TJ 145 _bD59 2023
100			_aDizon, Emmanuel Jesus D. _eauthor
245			_aDevelopment of Pedal Switch Hammering Machine for Forging _cEmmanuel Jesus D. Dizon, Carmelo Laurent A. Magalad, Zion C. Ontal, John Riff D. Silvestre and Karl Jericho B. Tonel.--
260			_aManila: _bTechnological University of the Philippines _c2023.
300			_axi 105pages _c29cm.
336			_2rdacontent
337			_2rdamedia
338			_2rdacarrier
500			_aBachelor's thesis
502			_aCollege of Industrial Technology.-- _bBachelor of Engineering Technology major in Mechanical Technology _cTechnological University of the Philippines _d2023.
504			_aIncludes bibliographic references and index.
520			_aThe development of a pedal switch hammering machine for forging is an innovative solution to improve the traditional forging process. This research aimed to design and build a machine that can deliver accurate and consistent blows to the metal workpiece, reducing human error and fatigue. The machine is composed of seven major components: the frame, pedal switch, hammer, pulley system, machine guard, 2hp induction brake motor, and anvil. The pedal switch mechanism ensures safety and ease of use, while the machine's design optimizes parameters like hammer blow force and metal temperature. A pedal switch hammering machine prototype was built and tested to evaluate its performance. The prototype was tested using three different grades of metal as the working material: mild steel, 4140, and 4340 round bars. The hammering for each metal was done in two trials each, and the results were measured, and the following variables were collected: difference in diameter of the workpieces with every single strike and time needed for the metal to reach its forging temperature before hammering. Results showed that the machine could deliver precise and uniform blows to the metal workpiece, reducing human error and fatigue. The prototype was evaluated by 30 respondents’ experts in forging, industrial, and mechanical technology and was rated 4.49, with an excellent rating. The prototype was found to be functional, although it can only be used in small-scale forging operations.
650			_2Mechanical Technology
650			_2pedal switch hammering machine
650			_2forging
700			_aMagalad, Carmelo Laurent A. _eauthor
700			_aOntal, Zion C. _eauthor
700			_aSilvestre, John Riff D. _eauthor
700			_aTonel, Karl Jericho B. _eauthor
942			_2lcc _cBTH CIT _n0
999			_c29648 _d29648