000			03101nam a22003257a 4500
003			OSt
005			20250703143731.0
008			250703b |||||||| |||| 00| 0 eng d
040			_aTUPM _bEnglish _cTUPM _dTUPM _erda
050			_aBTH TA 145 _bD38 2024
100			_aDavid, Timothy Paul A. _eauthor
245			_aInfluence of mortar infill and variations of outer diameter of flat and curved stainless-steel washers on the compressive strength of bambusa blumeana with bolt-anchored t-connection/ _cTimothy Paul A. David, Faith Vica S. Dela Cruz, Alexandra Jowayne D. Falcutila, Redj Asher M. Maninang, Ma. Nicole M. San Miguel, and Jeffrey A. Sevilla.--
300			_axxiv, 286pages: _c29cm.
336			_2rdacontent
337			_2rdamedia
338			_2rdacarrier
500			_aBachelor's thesis
502			_aCollege of Engineering.-- _bBachelor of science in civil engineering: _cTechnological University of the Philippines, _d2024.
504			_aIncludes bibliographic references and index.
520			_aBamboo has been utilized for structural purposes for thousands of years in diverse regions worldwide. It is a strong, rapidly growing, and highly sustainable material that contributes to structural engineering. The Bambusa Blumeana species is the most abundant in the Philippines and is considered to contribute to a low housing structure due to its excellent mechanical and physical properties. The use of Bambusa Blumeana for structural members has been limited, especially considering the influence of mortar infill and washer sizes on modern bamboo connections, which are prone to splitting failure and crashing failure due to the presence of bolt and dowel-type connections. In this study, the research aims to determine the effects of mortar and variation of the outer diameter stainless-steel flat and curved washer on the compressive strength of the bolted T-Connection Bambusa Blumeana, as well as failure modes and the optimal outer diameter size for the connection. The results indicate that the variation in outer diameter flat or curved stainless-steel washers does not significantly affect the compressive capacity of the bolted T-Connection. However, it does contribute to a minimal amount of compressive resistance and results in a more prolonged deformation of the connections. Ultimately, the findings indicate that the optimal outer diameter washer ranges from 40 mm down to 20 mm, indicating that the 40 mm outer diameter produces the highest compressive load for flat and curved surfaces, with or without mortar. The ASTM and ISO standards for the determination of the physical and mechanical properties of the bolted T-Connection Bambusa Blumeana guided the findings.
650			_aStainless-steel
650			_aStructural engineering
650			_aMortar infill
700			_aDela Cruz, Faith Vica S. _eauthor
700			_aFalcutila, Alexandra Jowayne D. _eauthor
700			_aManinang, Redj Asher M. _eauthor
700			_aSan Miguel, Ma. Nicole M. _eauthor
700			_aSevilla, Jeffrey A. _eauthor
942			_2lcc _cBTH COE _n0
999			_c30101 _d30101